Lumion Support Center

Gallery => Finished Projects Gallery => Topic started by: SketchUpBBS on February 04, 2011, 03:54:59 pm

Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 03:54:59 pm
The case of some of SketchUp + Lumion(1)
By xqggyy

The case of some of SketchUp + Lumion(2)

 http://lumion3d.com/forum/gall.....p-lumion2/

By the way, I ask each of the camera lens to the sun alone can not save a separate system?… 

 







Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 04:09:55 pm










Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 04:12:49 pm
Interior design attempts





Title: The case of some of SketchUp + Lumion
Post by: Morten on February 04, 2011, 04:24:27 pm
Nice work, SketchUpBBS - I particularly like the first and second interior renderings Smile

(Saving/loading/importing/exporting cameras is on the Functionality wish list, if that's what you mean)
Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 04:40:37 pm
Interior Design Stage Lighting
Put the model in a box and let the sun radiation in, the results were fantastic!

By  YeWu









 

SketchUp

Title: The case of some of SketchUp + Lumion
Post by: Aaron on February 04, 2011, 04:43:01 pm
Nice detail on the pagode temple. Must have been a good deal of work.

Some constructive C&C:

-The atmoshpere could use some touching up. Most of the Lumion renders I see have the cloudsettings way too bright. This destroys realism. Its highly uncommon for clouds to bloom large white patches.

-If you use 3d models for increasing depth perspective (ie, partially visible very close to the camera), best make sure the models help to achieve your goal. If you use bad models or too low poly, all you create is a major distraction from the good parts.

I like the 2nd render of the 2nd batch. It's very basic but it looks pretty and serene.
Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 04:43:20 pm
I very much hope that the new version Lumion to increase into the interior lighting systems. Such as points of light, surface light, spotlight, etc..
Title: The case of some of SketchUp + Lumion
Post by: SketchUpBBS on February 04, 2011, 04:45:09 pm
Aaron said:

Nice detail on the pagode temple. Must have been a good deal of work.

Some constructive C&C:

-The atmoshpere could use some touching up. Most of the Lumion renders I see have the cloudsettings way too bright. This destroys realism. Its highly uncommon for clouds to bloom large white patches.

-If you use 3d models for increasing depth perspective (ie, partially visible very close to the camera), best make sure the models help to achieve your goal. If you use bad models or too low poly, all you create is a major distraction from the good parts.

I like the 2nd render of the 2nd batch. It's very basic but it looks pretty and serene.




Thank you for your suggestions.