Lumion Support Center

Gallery => Finished Projects Gallery => Topic started by: BMcIsaac on June 19, 2012, 06:40:34 pm

Title: Google Earth and Lumion
Post by: BMcIsaac on June 19, 2012, 06:40:34 pm
Here are a few shots from an RFP. These shots where used to demonstrate the current conditions.

The first shot is from Google...the rest are what GE turned into with help from Lumion.
Title: Re: Google Earth and Lumion
Post by: arch_bd on June 19, 2012, 11:39:00 pm
Thanks a Lot Modelhead, great sample here. Can u tell the way how you did it placing shots from Google?
thanks in advance
Title: Re: Google Earth and Lumion
Post by: BMcIsaac on June 20, 2012, 02:54:27 am
By chance this project site fits on 4000x4000 ft.
To start this project I grabed the full size snapshot in Sketchup.  For two main, to use the low quality image as a guide/map and to capture the low poly mesh to which I will add detail as needed.

Except for "tools on surface" this is all native SU tools.

On the site there are three main views that the customer was interested in. At those positions on the google snapshot I need to start painting detail. But first I can get a higher resolution image back at GE.

In a second session of SU a grab the same large area then zoom in on the location/feature where I want detail and take the highest resolution image available.

Then I open the layers dialogue, unlock the GE mesh, and flatten everything to one layer. Now remove everything but the image. Be careful not to move anything because you want this detail image to stay geolacated so it can be copied in place in your original model and then projected to the mesh area where the detail belongs.

You will need to lift the image on the axis to get it slightly above the mesh..make sure it stays on the blue axis. Now if you go to top view you can select around the new image which will pick up the mesh underneath....deselect the image. You can now sample the image and project it onto the original mesh. If you project to far there will be a border. But it is easy to blend it by sampling the original material and adding it to the border polies...The old image will bleed into the new.
Do this for each of the feature careful to name the images so they make sense to you. If you open materials dialogue you will see all of the snapshots.

All of these should be exported to a file so you can take them into Photoshop or "what ever" and start painting detail.

In this project I had four images..the large original and three close ups that where projected at three locations..the beach...the new road entrance..and the old entrance.

I pushed each of these shots to 4000 pixels before I started. This allowed the level of detail you see in the shot of the highway museum entrance...yellow lines, white lines...the road itself....all that you see in that shot is painted on those 4000pix matts.

Before you paint over the matts with detail it is best to place all of your green things in Lumion...then you don't need the map anymore and you can just paint over the images.

The fields can be painted over with your favorite HQ grass patch....roads your fave sand/gravel texture patch...etc.

Use a very low opacity when you paint and it will just inhance the original and make the features pop out.

Woops...I forgot one very impotant thing..the mesh itself. As you know you can use it to modify your scenes as well. The first thing that we have to do is make sure our land contour is dramatic enough to use the Lumion Ocean. Meaning if the thing is flat it will flood.

The nice thing about the big mesh in SU is that you can turn off hidden geometry after using the tools on surface line tool and then select the entire land mass that you have cut out. This allows you to raise it.

Just use the move tool to shift all those polies up to the desired shoreline my case it was 12 to lock on blue/type in desired height...wala.

Now the fun the areas on the beach I had to add mesh..I took three passes with the sandbox mesh multiplier to get enough to work with, then I use the smooth tool to make a nice transition around the shore. I use what ever images I have of the site and do  my best to achieve accurate contour. This takes time...probable a couple hours altogether just adding mesh and smoothing. Many times moving  single verties up and down to get close.

You can put as much time into it as you want and get it looking very real if your customer is willing to pay..In this case I would call all of this medium detail. This early in the process it does the job very time in this model was 12 hours.

I rambled a bit...If you have questions I would be happy to try and answer.


Forgot another important will notice real Lumion terrain sticking up as well along the shore. You can use the fine shaping granularity to assist in shapping the lake. I also pushed up the terrain to cover the beach area and used the Lumion sand material because it is very realistic from that height and goes pretty good with the water.

So you have a lot of options when it comes to shaping and materials. The Lumion/GE/SU worflow is very versatile,  fast and very productive.
Title: Re: Google Earth and Lumion
Post by: arch_bd on June 20, 2012, 08:06:43 am
Long description but very worthwhile and understandable.Thank You Modelhead, now ill do some experimenting and try the lecture that u give to me.
Best wishes, Bledi
Title: Re: Google Earth and Lumion
Post by: dennischen on June 20, 2012, 08:11:43 am
These photos as very skilled ah, I'm from Google earth search my house, doesn't seem to have this effect
Title: Re: Google Earth and Lumion
Post by: Derekw on June 20, 2012, 11:13:14 am
Hi Modelhead, great images! It's always hard creating large areas of realistic landscape.

I've been doing a similar thing, using Google earth terrain. The attached model / images will form
the base for an up coming project. I replaced the the Google Earth photography though with much sharper 'Nearmaps' imagery which I grabbed using a program called 'hyper tiles'. I then applied these images as a seamless texture. The Ocean and vegetation were then added. The model is 130 Mb and I haven't even added the buildings yet!
Title: Re: Google Earth and Lumion
Post by: Derekw on June 20, 2012, 11:27:13 am
Woops. Sorry for the double images. Not sure how that happened.
Title: Re: Google Earth and Lumion
Post by: kais Jacob on June 20, 2012, 12:33:09 pm
Bonjour modelhead
Merci pour l'info
Title: Re: Google Earth and Lumion
Post by: zdesign on June 20, 2012, 12:37:00 pm
impressive work...
Title: Re: Google Earth and Lumion
Post by: Aaron on June 21, 2012, 01:10:44 am
Have you guys ever experimented with the new option to load custom terrain textures?
I was hoping this would allow us to create very sizable tiles with tons of detail.
Mixing the 4 slots would then allow for some pretty interesting results no doubt.
Unfortunately it seems even on its largest setting, the minimum tiling is still way too dense
for this to work.

Nice job Bruce.
Nice page of text too.
You should do copyrighting for moonlighting  :D
Title: Re: Google Earth and Lumion
Post by: BMcIsaac on June 23, 2012, 02:06:22 pm
Thanks everyone.
@Aaron...yes... If the the entire ground image could be broken into 16 X 4000 pix images it would make it possible to create a very convincing matt. As it is it can be used for small areas but it is still necessary to use your own mesh to get any expansive painting done.....Yes I guess that is what you just pointed out... :-D

Although very difficult to implement I'm sure..the ability to bring in a large terrain mesh that can be modified with the existing terrain tools and acts like native terrain for placing objects..i.e not planting trees under your mesh would be a very big improvement.

The worst part of the job for me is creating roads/sidewalks/curbing...and all the transitions/blending between them. It would be so cool to be able to create a high-poly mesh with curbing and then paint it.

Title: Re: Google Earth and Lumion
Post by: Robert A. Christman on June 25, 2012, 02:11:57 am
right on modelhead. thanks fpr sharing. we have been experimenting with this also and desperately need some improvements in this area. you've really done a great job here.