Lumion Support Center

Gallery => Finished Projects Gallery => Topic started by: gar3th on June 04, 2012, 09:36:35 am

Title: Some works of mine
Post by: gar3th on June 04, 2012, 09:36:35 am
I just found out and started using Lumion a few days ago....where has this software been, i could have use it in the past if i knew.

Anyway here is a video I did and some conceptual renderings.

AIRPORT - SKETCH UP & LUMION (http://www.youtube.com/watch?v=GIJLRCag3ps#ws)

(http://i1017.photobucket.com/albums/af298/ONLY1GAR3TH/11-5-1.jpg)

(http://i1017.photobucket.com/albums/af298/ONLY1GAR3TH/111-2-1.jpg)
Title: Re: Some works of mine
Post by: gar3th on June 04, 2012, 09:42:53 am
(http://i1017.photobucket.com/albums/af298/ONLY1GAR3TH/11-4-1.jpg)

(http://i1017.photobucket.com/albums/af298/ONLY1GAR3TH/111-1-1.jpg)

(http://i1017.photobucket.com/albums/af298/ONLY1GAR3TH/1111-1-1.jpg)
Title: Re: Some works of mine
Post by: Architect JM on June 05, 2012, 12:52:25 am
... this Airport idea is so cool... nice ... !!!
 :-P
Title: Re: Some works of mine
Post by: kais Jacob on June 05, 2012, 06:48:27 am
Good start --- Needs to work more to get to the fullest  ;)
Title: Re: Some works of mine
Post by: Robert A. Christman on June 05, 2012, 01:15:47 pm
very, very nice! You are off and running already...What a great start! Really cool looking model.

If you want to avoid the flickering of materials, edit the material, select the "placing" tab and adjust the "depth offset" to fix the z-fighting. You can usually just start with a -1 and it should not flicker anymore.

you can also remove some of the "haziness" if you want it to be less prevalent by cutting back the fog settings in the weather controls.

good luck & welcome. i look forward to seeing more updates.

Bob


Title: Re: Some works of mine
Post by: gar3th on June 05, 2012, 02:33:17 pm
... this Airport idea is so cool... nice ... !!!
 :-P
Good start --- Needs to work more to get to the fullest  ;)

Thank You

very, very nice! You are off and running already...What a great start! Really cool looking model.

If you want to avoid the flickering of materials, edit the material, select the "placing" tab and adjust the "depth offset" to fix the z-fighting. You can usually just start with a -1 and it should not flicker anymore.

you can also remove some of the "haziness" if you want it to be less prevalent by cutting back the fog settings in the weather controls.

good luck & welcome. i look forward to seeing more updates.

Bob

Thanks, I'll definitely try that out.
Title: Re: Some works of mine
Post by: gar3th on June 29, 2012, 02:42:26 am
The beach location of this train station is a bit ludicrous....
Title: Re: Some works of mine
Post by: gar3th on June 29, 2012, 02:42:55 am
The beginning was the only reason I made this  :-D

Lumion - Train Station (http://www.youtube.com/watch?v=vxQjPiLGw8U#ws)