Lumion Support Center

Support for unlicensed users => Post here if you can't find your License Key => Topic started by: archmelino on April 03, 2012, 04:52:56 pm

Title: 3D rotate
Post by: archmelino on April 03, 2012, 04:52:56 pm

Is possible to rotate Lumion Objects (cars for example) in  360° 3D?
For example rotate a car to aligned on the sloping road (plan xZ or yz not xy)

Title: Re: 3D rotate
Post by: Morten on April 03, 2012, 05:30:16 pm

Hi archmelino, is this what you mean?

(F): The orientation of all objects (apart from Trees/plants) can be made to adapt to the surface angles of other objects. Move object button -> Press (F) for "Flatten" -> Move the object(s) to make them adapt to the surface angles of other objects.

(Excerpt from the Tips, Tricks and Shortcuts thread)

http://lumion3d.com/forum/f-a-q/lumion-2-tips-tricks-and-shortcuts/ (http://lumion3d.com/forum/f-a-q/lumion-2-tips-tricks-and-shortcuts/)

Title: Re: 3D rotate
Post by: archmelino on April 03, 2012, 06:24:19 pm

I've Lumion 1 sp2 B8
With Lumion terrain is all ok- like image
With my 3dface object (road or ramp) is not possible to use F mode?
Thank you

Title: Re: 3D rotate
Post by: kais Jacob on April 03, 2012, 06:39:42 pm

Quote from: archmelino on April 03, 2012, 06:24:19 pm

I've Lumion 1 sp2 B8
With Lumion terrain is all ok- like image
With my 3dface object (road or ramp) is not possible to use F mode?
Thank you

I am also find  difficult to install cars on little slope ( not on big slope)

Title: Re: 3D rotate
Post by: Morten on April 03, 2012, 06:43:02 pm

Ah, it works slightly differently in Lumion 1.

Please check out the Tips, Tricks and Shortcuts thread for Lumion 1:

http://lumion3d.com/forum/f-a-q/lumion-1-tips-tricks-and-shortcuts/ (http://lumion3d.com/forum/f-a-q/lumion-1-tips-tricks-and-shortcuts/)

LUMION 1 ONLY:

(F): The orientation of all objects (apart from Trees/plants) can be made to adapt to the inclination of the Lumion terrain. Move object button -> Hold down (F) for "Flatten" -> Move the object(s) to make them adapt to the inclination of the terrain.

(CTRL) + (F): The orientation of all objects (apart from Trees/plants) can be made to adapt to the surface angles of other objects. Move object button -> Press (CTRL) + (F) for "Flatten" -> Move the object(s) to make them adapt to the surface angles of other objects.