Lumion Support Center

Support for unlicensed users => Post here if you can't find your License Key => Topic started by: Wayne783 on June 14, 2014, 12:48:34 pm

Title: REFLECTION PROBLEM
Post by: Wayne783 on June 14, 2014, 12:48:34 pm
Hi guys,

I have a major hand in for university on Tuesday (17th June), but im sitting with a bit of an issue here.

When i add reflective surfaces to materials such as my floor and walls INSIDE of my building, i get the reflection of the sun and the clouds from outside but my building is completely closed up on that side. How can i get the sun and cloud reflection out of the interior of the building yet maintaining the reflective surface i want (ie. polished concrete screed floor).

See the attached image below

If any of you guys have constructive advise i would seriously appreciate it!

PLEASE HELP!!

Wayne
Title: Re: REFLECTION PROBLEM
Post by: Serget704 on June 14, 2014, 06:16:32 pm
I use 4.5 ver. and I have the same problem with a bathroom mirror.
Title: Re: REFLECTION PROBLEM
Post by: Zdenek Fajfrlik on June 14, 2014, 07:12:42 pm
hi,
have you tried to place the REFLECTION SPHERE inside the room?

stan
Title: Re: REFLECTION PROBLEM
Post by: Serget704 on June 14, 2014, 09:15:14 pm
I will try, thanks a lot!
Title: Re: REFLECTION PROBLEM
Post by: Zdenek Fajfrlik on June 14, 2014, 10:21:19 pm
hi,
i was interested myself and checked it.
it works here!
stan
Title: Re: REFLECTION PROBLEM
Post by: Morten on June 14, 2014, 10:59:27 pm
Hi guys, please read the section called 'Reflections in Lumion' in the Tips, Tricks and Shortcuts (http://forum.lumion3d.com/f-a-q/lumion-4-tips-tricks-and-shortcuts/msg45470/#msg45470) post.