Author Topic: using 2d people with alpha maps inside Lumion (Read 8214 times)

madmax2000 · « **on:** August 06, 2011, 11:22:39 pm »

Hello,

I've got a question, hope it hasn't been asked before....

If I have a Sketchup model imported into Lumion as Collada file, how can I use 2d people with alpha transparency inside Lumion? Do I have to load each one inside Lumion or can I do it from Sketchup?

Best!

madmax2000 · « **Reply #1 on:** August 09, 2011, 03:40:02 pm »

Anyone?

dbaird · « **Reply #2 on:** August 09, 2011, 11:39:54 pm »

This is a good question & it would be helpful to have a reply posted by Lumion Staff.
Many of us Sketchup users have 100's if not 1000's of these components created.
Thank you

Gilson Antunes · « **Reply #3 on:** August 10, 2011, 06:13:09 am »

I do not know if I understand your question.
But the ideal is to do a vertical plane in the right measure and with the origin at the center of the base, import into Lumion and apply the "png" texture "billboard" with alpha channel.
There are post dealing with this matter.

Remko · « **Reply #4 on:** August 10, 2011, 10:55:21 am »

It's really easy to import a billboard from Sketchup. Just make sure the origin is at the 'rotation point'. For that point you can place many of the billboards. Importing many billboards at once is not possible yet since the importer does not get enough information to establish the rotation point for each billboard. This is atypical issue which can be solved when we have a sketchup plug-in.

madmax2000 · « **Reply #5 on:** August 10, 2011, 03:01:44 pm »

Thanks for the reply......

So let's say I have some people from Dosch Design and each person has a .jpg and an corresponding alpha .jpg......I have to make them a .png image in Photoshop?

Sorry again, best regards

dbaird · « **Reply #6 on:** August 12, 2011, 03:19:08 am »

Thanks for the reply.
Much appreciated.

dbaird · « **Reply #7 on:** August 17, 2011, 02:17:49 am »

OK

Here are the simple steps to transform 2D SU Face Me (Billboard) components into 2d Face Me (Billboard) Lumion component.

1. Make sure the (2D) SU Face Me component is properly made with the front face aligned (perfectly) with the red axis & the center of the base of the component is at the intersection of the red, green & blue axis.
2. Export the (2D) SU Face Me component via .dae file
3. Import .dae component file into Lumion
4. Paint the imported 2D component with the "Billboard" texture in Lumion which automatically transforms the component into a 2D Lumion Face Me component.

Gilson Antunes · « **Reply #8 on:** August 17, 2011, 03:49:03 am »

Yes the plan is always facing the camera. example attached video

Author Topic: using 2d people with alpha maps inside Lumion (Read 8214 times)

madmax2000

using 2d people with alpha maps inside Lumion

madmax2000

Re: using 2d people with alpha maps inside Lumion

dbaird

Re: using 2d people with alpha maps inside Lumion

Gilson Antunes

Re: using 2d people with alpha maps inside Lumion

Remko

Re: using 2d people with alpha maps inside Lumion

madmax2000

Re: using 2d people with alpha maps inside Lumion

dbaird

Re: using 2d people with alpha maps inside Lumion

dbaird

Re: using 2d people with alpha maps inside Lumion

Gilson Antunes

Re: using 2d people with alpha maps inside Lumion

Product

Support

About us

Site links

Supported tools