Author Topic: [Resolved]: Help - Removing Underwater effect Lumion 2.1/3  (Read 5863 times)

JuanCa

    Reputation: 1
[Resolved]: Help - Removing Underwater effect Lumion 2.1/3
« on: February 26, 2014, 04:15:55 pm »
February 26, 2014, 04:15:55 pm
Somehow my model got "flooded" with the underwater effect and I cannot figure how to remove it.
Any quick fix?  Thanks!


Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #1 on: February 26, 2014, 04:44:36 pm »
February 26, 2014, 04:44:36 pm
Hi JuanCa, have you tried to move the camera high up in the air to see if you accidentally added a Water plane?

You can delete unwanted water planes like this:
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #2 on: February 26, 2014, 06:46:13 pm »
February 26, 2014, 06:46:13 pm
I tried to get as far as it goes and the water is everywhere.  I had movie sections done and some of them have no water, I though maybe jumping back to the model from the movie will put the model with no water but is still there. See clip attached.  Thanks!

michaelholt

    Reputation: 13
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #3 on: February 26, 2014, 06:52:46 pm »
February 26, 2014, 06:52:46 pm
you activated the ocean? and ticked the waterlevel?

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #4 on: February 26, 2014, 07:14:47 pm »
February 26, 2014, 07:14:47 pm
Ocean mode is "OFF". 
I wonder if it is posible to import a lumion file to another lumion project? and maybe clean the effects that way.

Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #5 on: February 27, 2014, 10:10:25 am »
February 27, 2014, 10:10:25 am
Can you upload the 2 scene files please? (wetransfer.com -> morten [at] act-3d.com and peterm [at] act-3d.com)

We don't need any of the imported model files.
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #6 on: February 27, 2014, 04:08:40 pm »
February 27, 2014, 04:08:40 pm
I just sent them.  Thank you for your help!

Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #7 on: February 27, 2014, 04:23:34 pm »
February 27, 2014, 04:23:34 pm
Which version did you save these files in, i.e. what is the exact version number?
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #8 on: February 27, 2014, 04:28:47 pm »
February 27, 2014, 04:28:47 pm
I use demo version Lumion 2.1/3

Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #9 on: February 27, 2014, 05:23:39 pm »
February 27, 2014, 05:23:39 pm
Unfortunately I haven't got Lumion Free 2.1 anymore, so I can't even load your scene.

Can't you use Lumion Free 3.2.1 instead?
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #10 on: February 27, 2014, 07:02:24 pm »
February 27, 2014, 07:02:24 pm
OK, I will update to the next version and see if I can fix it.  I will let you know.  Thank you again.

Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #11 on: February 27, 2014, 08:53:45 pm »
February 27, 2014, 08:53:45 pm
If you're evaluating Lumion, I'd recommend contacting a reseller.

They'll be able to give you a time-limited but fully functional trial version of Lumion 4.
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

RAD

    Reputation: 32
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #12 on: March 04, 2014, 09:32:53 pm »
March 04, 2014, 09:32:53 pm
Thumbs up / +1 Rep JuanCa .

Thank you for participating in the forum.
Cheers   :)

Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #13 on: March 05, 2014, 12:46:01 am »
March 05, 2014, 12:46:01 am
Hi JuanCa

I tested your scene files sent us, unfortunately, it crashed the Lumion v2.1 Build 3 (both Free and full version) on my system, so was not able to test further in that version.  Also tried in v4, but same problem.

Hopefully by now you will have had time to download and install the most recent Free version (or Trial) and tested again, as that problem should not be there.

JuanCa

    Reputation: 1
Re: Help - Removing Underwater effect Lumion 2.1/3
« Reply #14 on: March 05, 2014, 01:46:52 am »
March 05, 2014, 01:46:52 am
Thank you guys! 
I left the pc installing the latest trial Lumion.  As soon as I get it up and running will post the results.