Author Topic: |  (Read 3276 times)

BABE™

    Reputation: 104
|
« on: December 05, 2011, 04:52:03 pm »
December 05, 2011, 04:52:03 pm
|

| GTX 980 Intel® Core™ | i7-4790K CPU - |

tug

    Reputation: 28
How to make a dripping logo?
« Reply #1 on: December 05, 2011, 05:03:45 pm »
December 05, 2011, 05:03:45 pm
How did you do the waterfall please ?

Hi Dazo, the waterfall is really easy to do, you only need a mesh wher aply the waterfall texture from Lumion. How to do this mesh is the matter, but using any modeler software (skp, rhino, Bonzai.....) with nurbs you can do it quite easy.

Byz great work again, as all shown here.

byzantium1200

    Reputation: 43
How to make a dripping logo?
« Reply #2 on: December 05, 2011, 05:07:09 pm »
December 05, 2011, 05:07:09 pm
How did you do the waterfall please ?
Hi Dazomatic, First I made the water surface, then I copied it a few centimeters below for the riverbed. I lowered the parts of the riverbed where I wanted water to pool. Export to Lumion, riverbed is landscape material.

byzantium1200

    Reputation: 43
How to make a dripping logo?
« Reply #3 on: December 05, 2011, 05:40:53 pm »
December 05, 2011, 05:40:53 pm
can i buy the water surface off you ?..................in fact can i buy this scene off you ?
Dazomatic I have never sold my models, even if I did, this particular one is not worth anything. Except the water and riverbed everything comes from Lumion. Do you need a special water surface, maybe I can help with that.

Brian Hengelsberg

    Reputation: 43
How to make a dripping logo?
« Reply #4 on: December 05, 2011, 06:38:44 pm »
December 05, 2011, 06:38:44 pm
Offset from the logo a set distance, extend it down to the "ground", and make it its own material.  Add the waterfall texture to the new material in Lumion.

edit:  think of the objects in reality, the logo would not be one in the same as the water...or if it was, you need that to be a constant path as you would follow the water to it's final destination.

tug

    Reputation: 28
How to make a dripping logo?
« Reply #5 on: December 05, 2011, 06:43:03 pm »
December 05, 2011, 06:43:03 pm
How did you do the waterfall please ?

Hi Dazo, here is a simple process to create a waterfall

from a simple mesh to a lumion's waterfall (done in five minutes)


Brian Hengelsberg

    Reputation: 43
How to make a dripping logo?
« Reply #6 on: December 05, 2011, 06:45:23 pm »
December 05, 2011, 06:45:23 pm
Holy crap Lofts that is a lot of icons on your sketchup screen....lol...jeez!!! :D


tug

    Reputation: 28
How to make a dripping logo?
« Reply #7 on: December 05, 2011, 06:49:01 pm »
December 05, 2011, 06:49:01 pm
Hi Dazo, really simple.... believe me, I've saw your post and you can do this without any efforts,.

If I have time I'll post a video tomorrow with this simple process to do a waterfall, any case if you need any support ask for it.

tug

    Reputation: 28
How to make a dripping logo?
« Reply #8 on: December 05, 2011, 06:49:49 pm »
December 05, 2011, 06:49:49 pm
Holy crap Lofts that is a lot of icons on your sketchup screen....lol...jeez!!! :D

:D :D. used all of them...

tug

    Reputation: 28
How to make a dripping logo?
« Reply #9 on: December 05, 2011, 07:06:57 pm »
December 05, 2011, 07:06:57 pm
dripping it's a little complicated, maybe using "realflow" or some aplications over Max, but you can do a waterfall flowing over logo using the sample explained before, with a little work.

doing a vertical mesh in one hand and the Warner logo in the other hand, and using some after effect as drip over logo.

http://www.realflow.com/

byzantium1200

    Reputation: 43
How to make a dripping logo?
« Reply #10 on: December 05, 2011, 07:08:35 pm »
December 05, 2011, 07:08:35 pm
Thanx Byzantuim ...

perhaps i want the impossible....
i want the waterfall to DRIP OFF the logo its been assigned to, so how do i create a MATERIAL that does that ?

also .as soon as the Waterfall Material comes into contact with the ocene , it Vanishes part of the Model logo too.
Hi Dazo,

Maybe you should try something like this instead of assigning waterfall to the logo. This is very rough modelling, with more work better results can be achieved.

tug

    Reputation: 28
How to make a dripping logo?
« Reply #11 on: December 05, 2011, 07:10:03 pm »
December 05, 2011, 07:10:03 pm
Hi Dazo,
Maybe you should try something like this instead of assigning waterfall to the logo. This is very rough modelling, with more work better results can be achieved.

Byz, really what I said!!!!!

byzantium1200

    Reputation: 43
How to make a dripping logo?
« Reply #12 on: December 05, 2011, 07:11:58 pm »
December 05, 2011, 07:11:58 pm
Byz, really what I said!!!!!
Just read it after the post.  :)

How to make a dripping logo?
« Reply #13 on: December 06, 2011, 02:37:55 pm »
December 06, 2011, 02:37:55 pm
Daz, have you already tried to add some of the fountain effects? (you can customise them in the Modify object menu)
IMPORTANT: Please do not send private messages and emails to members of staff - unless we specifically ask you to send us sensitive information, for example License Keys.

tug

    Reputation: 28
Re: How to make a dripping logo?
« Reply #14 on: December 07, 2011, 02:46:44 pm »
December 07, 2011, 02:46:44 pm
nice shot Dazo!!